Every LED light on your Netgear wireless router has a meaning. If the LED on your home router is green, then it means that everything is good. But, if the LED is blinking red by any chance, then you should be worried.
However, the good news is that we can help you resolve the Netgear router red light issue. A little coordination is needed from your side too. All you need to do is, carefully follow the Netgear router troubleshooting tips mentioned below and learn how to get rid of the red light issue in a flash. So, read on.
Fixed: Netgear WiFi Router Blinking Red
- Check the Power Supply
Before you do anything else, check the power supply of your Netgear wireless router. Is your device getting enough power supply from the electrical outlet? If not, then that is probably because the wall outlet is damaged.
To get the issue resolved, it is recommended that you plug your Netgear router into a different power socket.
- Perform Netgear Firmware Update
Updating the firmware of your Netgear wireless router to the latest version can also help you troubleshoot the red light issue. Here is how you can perform Netgear router firmware update:
- Switch on your computer or laptop.
- Open an internet browser.
- In the URL bar of the browser, type routerlogin.net.
- Press Enter.
- The Netgear router login page will welcome you.
- When prompted, enter the default username and password.
- Click Log In.
- Once logged in, go to Settings.
- Select Maintenance.
- Click Firmware Update.
- Follow the on-screen prompts.
By following these instructions, you will be able to update the firmware of your Netgear router. Now, check whether you are still facing the red light issue. If you are, then continue reading this article.
- Verify the Ethernet Cable
Chances are that the connection between your Netgear router and the existing modem is not proper. Well, that might be because of a damaged Ethernet cable.
Therefore, make sure that the Ethernet cable connecting your router and the existing modem is not damaged from anywhere.
- Relocate Your Netgear Router
If you haven’t placed your Netgear wireless router at its ideal location, then also you can come across the red light issue. Therefore, it is recommended that you change the location of your device right away.
Make sure that it is not placed in corners or near thick concrete walls. Also, keep your router away from metal objects, transmitting appliances, reflexive surfaces, and electronic devices.
Once you have relocated your router, check if the LED is still blinking red? Is it? Well, in that case, you need to take the help of the next troubleshooting hack.
- Reset Your WiFi Router
If nothing has worked for you so far, then trust us, performing factory default reset will surely assist you in troubleshooting the Netgear router red light issue.
Walk through the guidelines given below and learn how to reset your wireless device:
- Look for the Reset button located on your Netgear router.
- Once found, carefully press it using an oil pin or any other sharp object.
- Wait for a couple of seconds and let the changes that you have made to your device become effective.
In this manner, you will be able to restore your Netgear wireless router to the factory default settings in a hassle-free manner.
Note: Once you are resetting your wireless device, do perform routerlogin.net setup.
The Bottom Line
This was all about how you can troubleshoot the Netgear router red light issue. Here is to hope that after following the troubleshooting tips mentioned above, you will be able to fix the red light issue in a jiffy.
If to your knowledge, there is any other way through which a person can get rid of the red light issue, do share it with us via the comment section.